BasicXL BXL-AC40 Manual De Uso página 2

Mirror alarm clock
OPERATION:
1. BATTERY INSTALLATION:
Open the battery cover, then install 2X AAA batteries according to the correct
polarity and then replace the cover. All the data should appear on the mirror for
3 seconds, then a beep tone is heard and the time is displayed.
2. ON/OFF SWITCH
ON – The time display is permanently on. In this mode, the display alternates
between the time and the date;
OFF– Power save mode. The time is activated for 6 seconds when there is a
sound over 80 dB, or if any part of the product is touched, or if the table on which
the product is placed is tapped.
3. TIME SETTING
● In the time display mode, press SET to enter the setting mode and the "year"
figure begins to flash;
● Press UP or DOWN to set the desired year and press SET to confirm, then the
"month" figure begins to flash;
● Press UP or DOWN to set the desired month and press SET to confirm, then
the "date" figure begins to flash;
● Press UP or DOWN to set the desired date and press SET to confirm, then the
"hour" figure begins to flash;
● Press UP or DOWN to set the desired hour and press SET to confirm, then the
"minute" figure begins to flash;
● Press UP or DOWN to set the desired minute and press SET to confirm and
exit.
4. ALARM SETTING
In the time display mode, press DOWN to enter the alarm setting mode, and it
displays "XX: XX" or "--:--" with the symbol "●" (It cannot be set if the display is
"--:--", press UP to switch to "XX:XX" display).With "XX:XX" on the display, press
SET, then the "alarm hour" figure begins to flash. Press UP or DOWN to set the
alarm hour and press SET to confirm, then the "alarm minute" figure begins to
flash. Press UP or DOWN to set the alarm minute then press SET to confirm and
exit.
ENGLISH
2