Delta 27791 Manual Del Usuario página 6

BATHTUB INSTALLATION (Continued)
7. Secure Bathtub
1-1/4" screws
(panhead or
roundhead)
Top
flange
TIP: Place drop cloth in bathtub and stand inside
bathtub to press it to fl oor when securing to wall studs.
◘
Secure flanges to wall studs with 1-1/4" screws.
 CAUTION: Use panhead or roundhead screws. Do not
overtighten screws, this can cause fl anges to crack.
IMPORTANT! Gaps between fl anges and studs must be
less than 1/8". Insert shims to fi ll gaps.
Shim
Top
flange
Less than
1/8" gap
Side
flange
8. Apply Sealant
Finished wall
◘
If installing our matching wall set, proceed with "Wall Set
Installation" instructions.
 CAUTION: After installing fi nished walls, remember to
apply sealant to all outer edges.
 APPLY SEALANT to seal gap between bathtub and wall.
IMPORTANT! Follow manufacturer's instructions for
sealant dry time before use.
6
P/N 27791 05/13