Measuring Oral Temperatures - Welby FTM394 Manual Del Usuario

USA Measuring temperature

Measuring oral temperatures

1. Remove the thermometer from the pro-
tective case
2. Clean the flexible measuring tip
soap and water or a disinfection solution.
3. Press the power button
thermometer, the last measured tempera-
6
ture
symbol
When the temperature unit
(°F or °C), the thermometer is ready.
4. Place the flexible measuring tip under the
tongue.
5. The temperature reading should take
about 10–30 seconds.
6. The temperature unit symbol will flash
during the reading.
7. When the peak temperature has been
reached, the temperature unit will stop
flashing and the thermometer will sound
10 long beeps. The measured tempera-
ture can be read on the LCD-display
If the temperature is below 89.6 °F (32 °C),
the LCD-display will show "Lo."
16
2 (see fig. D).
will appear with the memory
8
.
3
5
to turn on the
7
flashes
with
4
.