Oster CKSTPCEC57M-013 Manual De Instrucciones página 25

Steam Release Valve Cover
The Steam Release Valve Cover is on the underside of the Lid. Ensure it is clear from
debris before you begin using the Multi-Cooker. To clean, carefully pull the cover off
and clean using warm, soapy water. Press the cover back into its place after cleaning is
complete.
UNDERSIDE OF LID
Steam Release Valve
Cover
Bobber Valve
Gently press the valve up and down 2-3 times and ensure it is clear from debris before
you begin using the Multi-Cooker.
Lid Lock Pin
Gently press the pin and ensure it is clear from debris before you begin using the Multi-
Cooker.
Note:
1. Condensation may collect inside the Heating Base under the removable Cooking Pot.
This is normal. Allow to cool, and then dry using kitchen cloth.
2. Always make sure that each component (pot, valves, gasket, etc.) is completely dry
before you put back into the Multi-Cooker.
CKSTPCEC57M_20SEM3 (LA).indd 10 CKSTPCEC57M_20SEM3 (LA).indd 10
Bobber Valve
Figure 4
E 10
8/7/20 10:32 8/7/20 10:32