NEXPEAK K1 Guia Del Usuario página 4

NEXPEAK K1 Tablet Configuration
Front Camera
Speaker
ABOUT NEXPEAK K1 Tablet
The NEXPEAK K1 tablet is made by high quality and durable materials, with android system pre-installed. Please do not install many
unauthorized software in tablet to affect the diagnostic experience. The K1 software for diagnostics are pre-installed after you successfully
register the product, you may update them if there are new release patches.
How to Charge and start
Make sure you are using AC outlet USB output is 5V/ 2A or above. Too low charging adapter may lead to impossible charging
◆
Keep pressing the power button around 5 seconds until the screen lights up, then release and the tablet will be powered up.
◆
Wi-Fi Set up
Tab [Settings] on desktop and then [Wi-Fi] to configure your Wi-Fi settings.
◆
Make sure you've connected to proper Wi-Fi with internet access before registration.
◆
Type-C Charge (5V/2A)
AUX 3.5mm
VOL +
VOL -
POWER button
Speaker
Mic
2
EN
Main Camera
4-levels Adjusting Holder