Mocreo MOSOUND Bar Guía De Usuario página 2

English
Please read this user ' s guide before using your new speaker.
MOSOUND QUICK PAIR
settings Bluetooth
Bluetooth
DEVICES
MOSOUND Bar
STEP 1 STEP 2
Press the Power bu on Turn on your device's
for 3 seconds. A prompt B l u e t o o t h (refer to
sound of "Do" appears, your device's user 's
a n d t h e i n d i c a t o r guide).
flashes in blue as the
speaker searches for a
Bluetooth-e n a b l e d
device.
Over view
③
① ②
1. Previous/Volume + by Long Press
2. Microphone
3. Next / Volume - by Long Press
Packing List
1. MOSOUND Bar Portable Bluetooth Speaker x 1
2. USB Charging Cable x 1
3. 3.5mm Audio Cable x 1
4. User 's Guide x 1
settings settings Bluetooth Bluetooth
Bluetooth Bluetooth
DEVICES DEVICES
MOSOUND Cubbit MOSOUND Bar
STEP 3 STEP 4
When MOSOUND You can control your
Bar appears in the speaker through your
Bluetooth devices list, device or with the
pair it with your device. speaker's bu ons.
④ ⑤ ⑥
4.Micro USB Port 7.Power Button
5.3.5mm AUX In Jack 8.Play / Pause / Receive a Call
6.TF Card Port
-1-
Features
Rich, full, and dynamic stereo sound
Rechargeable batter y for up to 6 hours play time (medium volume)
Built-in microphone for picking up calls
USB charging port charges your devices
Support TF (Micro SD) card up to 16GB
Waterproof Bluetooth speaker : IPx4
Environment-friendly design of silicone material
Compatible with most Bluetooth enabled tablets, laptops, MP3 players,
and smartphones with iOS or Android™ platforms
Charging
Using the USB charging cable, connect your speaker to a computer or other USB
charging devices with a power USB port.
The charging indicator lights will be red during charging.
Indicator lights will be off automatically when fully charged.
A full charge takes about 4 hours. When fully charged, the speaker
can be operated for up to 6 hours at medium volume levels.
Operation
1. Press the Power button for 3 seconds. A prompt sound of "Do" appears, and the
indicator flashes in blue as the speaker searches for a Bluetooth-enabled device.
2. Turn on your device's Bluetooth (refer to your device' s user ' s guide).
3. When MOSOUND Bar appears in the Bluetooth devices list, pair it with your device.
4. You can control your speaker through your device or with the speaker ' s
, , buttons.
+/-
Note:
If a smartphone is connected and you receive a call, answer the call by pressing
speak into the microphone ( ).
If your device uses Bluetooth 2.0 and below, enter the password 0000 for Bluetooth connection.
If the connected device moves too far away from the speaker, the speaker disconnects
from the device but resumes connection once the device is close.
If you want to connect with a new Bluetooth device, please unpair the previous ones due to
the storage memory function.
-2-
and