Hu-Friedy Symmetry IQ Manual Del Usuario página 8

6
TIP REMOVAL
Hold the handpiece vertically. Insert the tip through the hole in the bottom of the Guardian wrench.
Depress wrench slightly while rotating to fully secure tip to wrench.
Turn the Guardian counter-clockwise to loosen and remove tip from handpiece.
Once removed from handpiece, do not remove the tip from the Guardian carrier.
CAUTION: Proper vibration of a tip depends on correct attachment to the handpiece. Always use the torque-limiting
Guardian wrench to ensure proper tip attachment and to eliminate over tightening or inadequate attachment of the tip.
Over tightening of the tip may result in damage to the handpiece or tip.