Sage the Bakery Boss Guía Rápida página 7

Assembly
Before first use
Before using your mixer for the first time, remove
any packaging material and promotional labels.
Ensure the speed control dial is in the OFF
position, the mixer is switched off at the power
outlet and the power cord is unplugged.
Wash bowl and mixing tools in warm soapy
water with a soft cloth. Rinse and dry thoroughly.
The bowl and the attachments may be washed
in the dishwasher.
When first using your appliance, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
Attaching the bowl
1. Place the mixer on a level, dry bench top. The
mixer motor head should be in the horizontal
(closed) position when moving.
2. When lowering or lifting the mixer, always
support the motor head with your other hand to
prevent it from free-falling.
3. To remove or insert the mixing bowl, the mixer
motor head must be raised and locked into the
open position. Raise the mixer motor head by
pressing the RELEASE button.
4. Lift the motor head up until it tilts back and locks
into the open position.
5. Insert the bowl into the bowl locking recess
and turn clockwise until the bowl locks securely
into place.
EN
7