Product Description; Description Of Controls - Concept OV5210 Manual De Instrucciones

EN

PRODUCT DESCRIPTION

1. Control panel
2. Power cord holder
3. Filter unit
4. Cooling cartridge
5. Water tank

DESCRIPTION OF CONTROLS

A. Power button
B. Mode button
C. Oscillation button
D. Cooling/humidifier button
E. Timer button
F. Air flow speed button
Control panel
B. C D
F
A
56
1
2
Remote control
E
A
C
B.
D
E
F
F F
OPERATION GUIDELINES
A – Power button
Press the Power button (A) to turn the appliance on/off.
B – Mode button
Use the Mode button (B) to select between 3 modes.
- Basic mode - cools constantly to the set air flow speed.
3
- Natural mode - changes the air flow speed to simulate a gentle breeze.
- Night mode - air flow speed automatically decreases from level 2 to 1.
C – Oscillation button
Use the Oscillation button (C) to turn the fan oscillation on/off.
D – Cooling/humidifier button
To activate the cooling/humidification function (D), pour water into the water tank (5). Press the button (D) to activate
the cooling/humidification function - the indicator lights up on the display. Press the button (D) repeatedly to
deactivate the cooling/humidification function. When the water level is low, the indicator of water level in the water
tank flashes on the display (cooling/humidification function does not start).
E – Timer button
4 The timer can be set between 0.5 h - 10 h at intervals: from 0.5 h to 3 h in 0.5h increments and from 3 h to 10 h in 1h
increments.
Caution! Setting by means of the remote control and the control panel on the appliance differs slightly.
5
Remote control: The timer can only be set using the Timer button (E). Press it repeatedly until the desired time is set.
Control panel: Press the Timer button (E) and use the + and - buttons to set the desired time.
F – Air flow speed buttons +/-
Use the + and - buttons to change the air flow speed.
OV5210 OV5210
EN
57