GE 106575 El Manual Del Propietario página 6

Step C Replace Bag Cover
Make sure bag is properly installed. Check to
NOTE:
see bag has not shifted away from bag inlet
during shipping. See page 13 for further
instructions.
Bag Cover
Latch
Tabs
4. Replace front cover by aligning tabs at bottom of
front cover into groove on cleaner. Pivot front
cover up against cleaner and rotate the bag cover
latch to the right to secure.
Step E Store Electrical Cord
5
Cord
Retainer
6
Bag Inlet
Groove
6
Cord
Hook
6
Cord
Hook
Step D Store Accessories
Dusting/
Upholstery
Brush
Crevice
Tool
5. You will find your cord retainer on the handle
above the upper cord hook. Firmly push the
electrical cord down into the cord retainer. This
will place the cord out of the way the next time
you vacuum.
6. Next wind the cord around the two cord hooks
on the back of the cleaner.
7. Secure the plug to the cord to prevent
unwinding.
Nesting
Extension
Wands