Need Help - T'nB UMMASK Manual De Instrucciones

EN
5) Check the seal before every use: once the mask is in place, close the filter with the hands, inhale
then hold your breath for a few seconds. If the seal is good, the mask tends to press slightly on the
face. Otherwise, the mask must be readjusted and the test restarted.
Filter replacement:
Maintenance - Cleaning
Use only water (no detergent) for cleaning.
Wash by hand only/Do not bleach/Do not iron
Only use T'nB accessories (filters) suitable for this type of mask
We recommend that you replace your mask after a service life of 5 years.
Storage
Store the mask in a clean and dry place.
Do not expose the mask to temperatures > 50°C
Characteristics:
Half mask filter
FFP1R class:
— FFP1 = Aerosols filtration percentage: 80 % at least/Leak percentage to the outside: 22 % maximum.
— R = Reusable
Composition: Neoprene + Lycra
One size fits all

NEED HELP?

Concerned about the satisfaction of our customers, you an contact us at info@t-nb.com.
Maintenance, troubleshooting, miscellaneous information about this product, please visit our
website: www.t-nb.com