Maintenance / Service; Caracteristiques Techniques - Skil VA13152 Serie Manual Original

- press on/off button A again to
turn off the adapter, the GREEN
indicator will turn off
! the adapter will automatically
shut off when charging is
completed or after an inactivity
of 3 hours
! when not in use, remove the
charger cable(s) and battery
• Battery protection
Switches off the tool or prevents the
tool from being switched on, when
- the battery temperature is not within
the allowable operating temperature
range of -20 to +50°C
- the lithium-ion battery is nearly
empty (to protect against deep
discharge)
! do not continue to press the
on/off switch after the tool is
switched off automatically;
battery may be damaged

MAINTENANCE / SERVICE

• This tool is not intended for
professional use
• Clean the tool with a dry, soft cloth (do
not use cleaning agents or solvents)
! remove battery from tool before
cleaning
• If the tool should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried
out by an after-sales service centre for
SKIL power tools
- send the tool undismantled
together with proof of purchase to
your dealer or the nearest SKIL
service station (addresses as well
as the service diagram of the tool
are listed on www.skil.com)
• Be aware that damage due to overload
or improper handling of the tool will
be excluded from the warranty (for
the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
• Do not dispose of electric
tools, batteries, accessories
and packaging together with
household waste material (only for
EU countries)
- in observance of European Directive
2012/19/EC on waste of electric
and electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned
to an environmentally compatible
recycling facility
- symbol 6 will remind you of this
when the need for disposing occurs
! prior to disposal protect battery
terminals with heavy tape to
prevent short-circuit
b
Adaptateur sans
fil pour câble de
chargement USB
INTRODUCTION
• Cet outil convient pour l'utilisation
d'un bloc-piles SKILL comme source
d'alimentation des appareils USB
• Cet outil n'est pas conçu pour un
usage professionnel
• Lisez attentivement ce manuel
d'instruction avant d'utiliser l'outil et
conservez-le pour pouvoir vous y
référer ultérieurement
CARACTERISTIQUES
TECHNIQUES 1
Tension de sortie :
Courant de sortie* : max. 2,1 A (port
Longueur maximale
autorisée du câble
USB
*Le courant de sortie réel dépend de
l'appareil USB connecté
6
3152
5,1 V dc
USB unique)
max. 3,6 A (2 ports
USB au total)
1,5 m