Publicidad
STEP 1 - Position speakers
1. Position the speakers in your room and select LEFT or RIGHT for the
speaker position using the switch at the rear of the speaker:
Boundary condition switch
Left/Right position switch
2. Set the Boundary Condition Switch to the correct position depending on
the location of the speaker. The foam port bung supplied is optional for any
of the boundary settings but is required when the speaker is positioned flat
against a rear boundary:
Speaker located in a corner
(less that 0.5m from 2 walls)
Speaker located next to a wall
(less that 0.5m from 1 wall)
Speaker in free space
(more than 0.5m from any wall)
These are suggested settings to help control the bass but spend some time listening and
choose the switch position that best suits your personal listening preference.
AC
UPDATE
ONLY
3
LEFT
RIGHT
LEFT
RIGHT
Publicidad
