General Safety Instructions; Device Description - LaserLiner VarioStand L Manual De Instrucciones

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
Function / application
Variable crank tripod with adapter for mounting devices with 1/4" and 5/8"
thread. Thanks to the special rubber-steel combination tips the tripod can be
easily adapted to different surfaces.

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
– Take care not to pinch your fingers when folding the tripod into
transport position.
– Do not set up the tripod on unsecured roads: risk of accident.
Instructions for use
– Avoid moisture and sand, clean thoroughly after use.
– Set up the tripod as perpendicular as possible on firm ground:
risk of toppling.
– Align to centre of gravity: risk of toppling.
– Under unfavourable wind conditions, an additional weight can be attached
to stabilise the tripod (not included in scope of delivery).
– Only use suitable instruments with 1/4" or 5/8" connection up to
the maximum load capacity.
– Before transporting or storing, instruments must be removed from
the tripod and the tripod folded into the transport position.

Device description

1 Mount for thread
adapter
2 Centre column
3 Crank height
adjustment
06
EN
page 02)
(see Fig. A,
4 Centre column lock
screw
5 Quick-release lock for
adjusting the tripod legs
6 Tripod leg lock
7 Rubber-steel tips
8 5/8" thread adapter
9 1/4" thread adapter