Led Operation; Adjusting The Picture; Troubleshooting Tips - Belkin F1D086U Manual Del Usuario

Using the CAT5 Extender

LED Operation

The orange Power LED indicates if the Transmitter and Receiver units are
powered on. The green Status LED indicates which console has control.
If the Status LED on the Transmitter is flashing, the remote console (or
Receiver) has control.
Transmitter
LEDs
Receiver
LEDs

Adjusting the Picture

When the remote console has control, you can adjust the picture quality by
pressing the Receiver's hot key "A" to force the remote port's video signal
to auto-adjust (see the "Hot-Key Commands Operation" section above).

Troubleshooting Tips

• Use the Receiver's hot key "A" to force the video signal to auto-adjust.
• Avoid using a specialized mouse. Mice with scrolling wheels
are supported.
• Avoid using a specialized keyboard (e.g., a keyboard with special
shortcut keys).
• The CAT5 Extender is not compatible with serial or PS/2 mouse ports or
KVM switches using serial mice at the console.
EN-13
LED Indication
Power On = USB power is present
On = normal;
Status
Flashing = receiving data
On = input is coming from connected
CAT5 source;
Remote
Flashing = Selected, but no signal;
Off = Not selected
On = input is coming from connected local
CPU source;
Local
Flashing = Selected, but no signal;
Off = Not selected