Vaisala CAB100 Guía Rápida página 19

4. Connect the phase, neutral, and grounding wires of the AC (mains) cable as indicated in
the figure below.
1
2
3
1 Connect the (green or yellow-green) grounding wire to the grounding terminal block.
2 Connect the phase (L) and neutral (N) wires to the circuit breaker: the phase in the
left-hand screw terminal and the neutral in the right-hand screw terminal.
3 Mount the AC (mains) cable to the strain relief fixture located under the circuit
breaker.
5. Reattach the transparent cover plate.
6. Switch on the circuit breaker.
7. Switch on mains power.
L N
19