Settings And Modes; Max/ Min Daily - Waldbeck Huygens 10032850 Manual Del Usuario

Important Notes
1. When power on, press WIND/+ and PRESSURE /- key to reset the weather
station and clear all records memory, and clears all user settings to default.
2. When power on, press TEMP. key to skip receive RF signal.
3. In Setting mode,pressing WIND/+ or PRESSURE/- key select the unit or
scrolls the value; keeping press and holding WIND/+ or PRESSURE/- key
for 2 second will increase/decrease digits in great steps.
4. The setting procedure can be exited at any time by either pressing the
LIGHT /SNOOZE key or waiting for the 30-second time-out to take effect.

SETTINGS AND MODES

Pressing the SET key for 2 seconds to enter setting model,the basic settings
can now be performed in the following order:
BEEP
Press the SET key for 2 seconds to select the beep section, ON/OFF section
digits will start flashing, press the WIND/+ or PRESSURE/- key to select ON
or OFF. "BEEP ON" will make the Beep sound on every key press. If you do not
want the beep sound to be heard, select "BEEP OFF"

MAX/ MIN Daily

Press the SET key twice to select the MAX/MIN Daily section, ON/OFF section
digits will start flashing, press the WIND/+ or PRESSURE/- key to select ON or
OFF . (Default is ON,ON: clear at 0:00 every day).
EN
93