Important - Morphy Richards FP48950MEE Manual De Instrucciones

QUICK GUIDE
Attachments & tools
Name Function
CHOPPING BLADE Chopping
Â
Blending
Pureeing
DOUGH BLADES Mixing
‰
Kneading
SLICING & Slicing/Shredding
SHREDDING
È
THICK SLICING & COARSE
SHREDDING
Ë
CHIPPING BLADE (certain models only)
Á
Chipping
(certain models only)
WHISK Whisking
Í
Cream
MINI PROCESSOR BOWL
fi
MINI CHOPPING Chopping
BLADE
‚
DO NOT PROCESS FOR LONGER THAN RECOMMENDED TIME. DO NO EXCEED RECOMMENDED
MAXIMUM VOLUMES. ALWAYS HOLD THE BLADES BY THE CENTRE GRIP.
www.morphyrichards.com
6
Type of food Max vol. Time
Meat, vegetables,
cheese, chocolate 700g 15-20 secs
Soup, drinks 700g 20 secs
Cooked vegetables,
potatoes, and fruit 600g 10-15 secs
Pastry, scones 350g 1 min max
Cakes (total weight) 1kg 1 min max
Bread dough 600g flour 20 secs
400g water + 2 min rest
Vegetables, cheese,
potatoes, fruit, chocolate
Vegetable, cheese
potatoes, fruit, chocolate
Potatoes, vegetable
batons
Egg whites 6 eggs 1-2 mins
(min 2-max 6 eggs)
570ml 40-50 secs
Herbs and small 20g herbs 2-5 secs
quantities
Assembly
Setting up
1 Ensure the appliance is unplugged
from the mains.
Special notes
2 To fit the bowl, align the handle as
shown. Turn the handle clockwise
Pulse gives control until it is clicked into place A.
over texture
(Note, the handle can be located for
left hand ⁄ or right hand ¤ use).
3 Fit the detachable drive shaft over
the induction motor drive. B
4 Select the appropriate blade and fit
over the detachable drive shaft,
Max vol=weight of
referring to 'fitting and using the
flour
tools' for details.
5 Fit the lid to the processor bowl by
aligning the indicator on the lid to the
right hand side of the handle and
Max vol= weight of
then rotate clockwise, until the lid
flour
Do not over process clicks firmly into place C.
6 Ensure that both food pushers are in
place before processing. They should
only be removed to insert food D.
FITTING AND USING THE
TOOLS
In general, all attachments (with the
exception of the mini processor bowl
and small blade) which are fitted
within the processor bowl must be
firmly attached to the detachable
drive shaft. Always adjust the
attachments until you are sure that
they are correctly fitted.
Detachable drive shaft
Insert attachments over the top of the
detachable drive shaft and ensure
that they are securely clicked into
Chips produced are place. Then remove the blade covers
usually small french
(if applicable), taking care as the
fries type
blades are sharp E.
Chopping blade
1 Fit the processor bowl as detailed
previously.
Do not over process
2 Fit the chopping blade over the motor
drive, and fit firmly into place F.
Warning: Use extreme caution -
the blades are sharp. Always
handle the chopping blade by its
central plastic section.
3 Place the food into the bowl.
4 Fit the lid and click into place as
detailed in the 'Setting up' section.
5 Plug in the processor and switch to
speed 1 G. If the processor does not
come on, check that processor lid is
correctly fitted.
Warning: For safety, always use
the food pusher when putting
food into the feeder tube. Never
feed by hand or utensils.
A
⁄
B
6 For large foods feed through with
the large food pusher. The small
pusher should be locked into place
when using. When processing small
pieces of food, unlock and use the
small food pusher, leaving the large
C
pusher in place in the lid H.
WARNING: Do not use the small
food pusher without the large
food pusher being in place in
the lid feed tube.
7 When the processing is complete,
D
remove the blade from the bowl
before removing the processed
food.
Dough blade
1 Fit the processor bowl into place as
described in 'Setting up'.
2 Place the dough blade on the
E
detachable drive shaft. Then place
the ingredients in the bowl.
3 Fit the lid and slot into place, make
sure that it clicks.
4 Now plug in the processor.
5 Turn the processor on and operate
until the dough has formed into a
F
small ball.
6 Remove the blade from the bowl
before removing the dough.
IMPORTANT: When kneading dough,
do not operate the machine longer
than 30 seconds.
Afterwards, wait at least 2 minutes
before operating the machine again.
G
Warning: For safety, always
leave the pusher in place whilst
operating the processor.
Whisk attachment
1 Fit the processor bowl as detailed
previously in 'Setting up'.
2 Place the whisk attachment onto the
H
motor drive.
3 Add ingredients into the bowl.
4 Fit the lid, food pusher and click into
place as detailed in 'Setting up'.
5 Plug in the processor.
6 Turn the processor on.
www.morphyrichards.com
¤
g
7