Setting The Network Configuration; Network Connection - Emprex IRX Manual Del Usuario

I.

Setting the Network configuration

In order to receive the internet radio program, IRX needs to connect to the
internet. You can connect the IRX in you LAN, either by Ethernet cable or
WiFi connection.
A. Network connection
You can use an Ethernet cable to connect the LAN port of IRX and a LAN
port of your router.
Note:
Your router should be setup to be able to link to your Internet
Service Provider.
If your router supports DHCP, then IRX can get an IP address automatically.
From the Main menu, press
ENTER or
press ENTER or
"Auto Setting(DHCP)", press ENTER or
Note:
The above steps will be abbreviated as "Configuration
Network
manual.
Otherwise, you can set the IP address manually. From the Main menu,
select "Configuration
IP Address " to set the IP address. And then input the Subnet Mask,
Default Gateway, and Preferred DNS Server from the same menu screen.
Note:
Please use ,
Mask, Default Gateway, and Preferred DNS.
,
key to enter the Configuration menu.
key to enter the IP Configuration submenu. Select
IP Configuration
Network
keys to change the value of IP address, Subnet
key to select "Configuration" item, press
key to enable the Auto Setting.
Auto Setting (DHCP)" in this
IP Configuration
10
Select "Network" and
Manual Setting