Package Contents - Tripp-Lite B119-302-R El Manual Del Propietario

Package Contents

• B119-302-R 2 x 1 HDMI Switch (V 1.3)
• AC Adapter (100-240V), 5V 2.6A Output
Overview and Product Features
The B119-302-R 2 x 1 HDMI Switch enables you to select one of two HDMI sources to be
displayed on a single HDMI monitor. Key product features are:
• HDMI Version 1.3
• Signal rates up to 10.2 Gbps
• Supports up to 1080p (1920 x 1080) resolution
Safety
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the presence
of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Installation and Operation
1. Connecting the HDMI Sources
Connect each HDMI Source to an Input Port on the
B119-302-R Switch using Tripp Lite P568-Series
HDMI cables (Not included).
NOTE: To ensure maximum functionality, the distance
between the HDMI Source and the
B119-302-R Switch should not exceed 16 ft (5 m).
2. Connecting the HDMI Display
Using the included 6 ft. HDMI cable, connect the
B119-302-R Switch Output Port to the HDMI
Display.
NOTE: To ensure maximum functionality, the distance
between the source and the B119-302-R Switch should not
exceed 16 ft (5 m).
3. Connecting the AC Adapter
Connect the included AC Adapter to the B119-302-R
Switch's DC Jack and then plug it into a power
source. (For protection against damaging surges
and spikes, it is recommended that you plug the AC
Adapter into a Tripp Lite Surge Suppressor).
4. Selecting an HDMI Source
To toggle between sources connected to the
B119-302-R Switch, press the Switch Button on the
side of the unit.
• 6 ft. HDMI Cable
• Owner's Manual
1
2
SWITCH
4
INPUT-1
HDMI Output Port
1
2
Switch Button (Allows you to choose
between 2 HDMI sources)
3
DC Jack (DC 5V, 2.6A power input)
4
HDMI Input-1 Port
5
HDMI Input-1 Port Indicator (The LED
lights when the input is chosen)
6
HDMI Input-2 Port Indicator (The LED
lights when the input is chosen)
7
HDMI Input-2 Port
2
OUTPUT
3
DC 5V
5 6
INPUT-2
7