Safety Information - Desa POWERFAST PEBNS11/4-B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Information

WARNING: Follow all safety precautions outlined in these operat-
ing instructions. Improper use of this tool can cause severe injury
or death from fire, electrical shock, or firing staple into body.
Before Operating Tool
1. Read and understand these operating instructions before operating tool.
2. Only well-instructed adults should operate tool. Never allow children to
operate tool.
3. Do not operate tool
• where highly flammable liquids or gases are present
• while under the influence of alcohol, medication, or drugs
• if exposed to rain or in damp or wet areas
• while tired or in a hurry
• if tool is damaged or malfunctions
4. To reduce the risk of electric shock, this tool has a polarized plug (one blade
is wider than the other) and will require the use of a polarized wall outlet or
extension cord. The plug will fit into a wall outlet or polarized extension cord
only one way. If the plug does not fit fully into the wall outlet or extension
cord, reverse the plug. If the plug still does not fit, obtain a correct polarized
extension cord and contact a qualified electrician to install the proper wall
outlet. Do not change the tool plug, extension cord receptacle, or extension
cord plug in any way.
5. Use only extension cords marked for outdoor use.
6. Never use this tool
• where a heavy-duty tool is needed
• where not intended. For example, don't use tool on concrete, metal, or
glass
7. Wear snug-fitting clothing when operating tool. Do not wear loose clothing
or jewelry. They can get caught in moving parts.
8. Wear the following safety gear when operating tool:
• rubber gloves (outdoors)
• footwear with non-skid soles (outdoors)
• eye protection such as safety glasses or goggles which meet or exceed ANSI
standards. Make sure all bystanders also wear proper eye protection.
• hair covering to contain long hair
9. Keep work area well lit.
10. Toggle power switch to the OFF (0) position and unplug tool
• when loading tool
• when not in use
• when moving from one place to another
• before maintenance
• when changing accessories
11. Do not alter this tool in any way. Only use accessories designed for this
tool.
www.desatech.com
2
116261

Publicidad

Tabla de contenido
loading

Tabla de contenido