Connecting To A Wireless Router; Wps Button - D-Link mydlink DCH-S165 Manual Del Usuario

Section 4 - Connecting a Wireless Client

Connecting to a Wireless Router

WPS Button

WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your DCH-S165 to your network. Please refer to the user
manual for the wireless router you want to connect to make sure you understand how to enable WPS. Once you know, follow
the steps below:
WPS Button
Step 1 - Press the WPS button on the DCH-S165 for about 1 second. The LED on the device will start to blink.
Step 2 - Within 120 seconds, press the WPS button on your wireless device.
Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and
your wireless connection will be secured with WPA2.
D-Link DCH-S165 User Manual 16