V-TAC VT-3042-3 Manual De Instrucciones página 8

FIG 6
STEP 4. INSTALL THE GLASS
• Make sure the key slot on the light glass is in the same line with the key slot on the fan
body, then rotate the glass clockwise slightly until the glass is firmly locked (Fig. 7 & 8).
Lift up the canopy to the ceiling for covering the mounting brack-
et(make sure the canopy will seat into the two screws on the
bracket), rotate the canopy to ensure the screw head are at the
narrow end of the key holes, tighten the screws (Fig. 6).
FIG 7 FIG 8
ENGLISH