Level One UTP Extender Serie Manual De Instrucciones página 5

IMPORTANT PRODUCT INFORMATION
1. HVE-9011T 1-Port Transmitter and HVE-9011R Receiver are
able to provide power to each other through Ethernet cable with
PoC (Power over Cable) technology. Therefore, power input
could be conveniently installed at either transmitter or receiver
end. Power input to both transmitter and receiver sides is also
feasible.
2. HVE-9014T 4-Port Transmitter is able to provide power to
HVE-9011R Receiver. However, HVE-9011R Receiver is unable
to provide power to HVE-9014T 4-Port Transmitter.
3. Be aware that wrong cable connection may cause fatal damage
to IR cables.
IR IN = Cable with the ROUND type module
IR OUT = Cable with the STICK type module
4. The built-in EDID emulator automatically selects the best
workable resolution setting for all connected screens (local and
remote). The emulation refreshes when any display devices
connected or disconnected