Ventur HXM Manual De Instrucciones página 4

ENGLISH
The fans in these series have
been manufactured to the rigo-
rous standard of production and
quality control as layed down by
the international quality standard
ISO 9001.
We recommend you check the
following points on receiving your
fan:
1. That it is the correct size.
2. That the execution is correct.
(wall, tubular, etc.)
3. That the details on the rating
plate are those you require:
voltage, frecuency, speed, etc.
Install according to current re-
gulations in each country.
Installation
The fans this series have been
carefully designed to be mounted
on the wall or as a component of
another appliance.
Fix the fan firmly whit bolts
througtt the holes in the frame.
Take care that the opening where
the fan is installed is not smaller
than the fan diameter.
Before making any electrical con-
nection, check that te fan is not
obstruded in any way.
Electrical Connection
Check that the voltage and
frecuency of the mains are the
same as those indicated on the
rating plate on the fan (max. va-
riation of tension and frecuency
± 5%).
Enclosure specification (IP 40 / IP
20 according to versions). Class
"B" electric insulation which
allows working temperatures of
up to 40 °C.
This series incorporates thermal
protection in the motor winding
which stops the fan whwn the-
re is a problem, thus avoiding
overloads and excessive tempe-
ratures and giving longer motor
lifeand greater user safety.
Before handling the fan, be sure
that it is disconnected, no just
swiched off (the thermal protec-
tion may reset itself and start the
motor).
Fan
The fan is dynamically balanced.
Working conditions and main-
tenance
The temperature of the air
through the unit must not exceed
40 °C.