Tabla de contenido
Publicidad
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR
The warranty conditions are different, if the device is used for commercial purpose.
1.Before using the product please read carefully and always comply with the following instructions. The manufacturer is not
responsible for any damages due to any misuse.
2.The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3.The applicable voltage is 230V, ~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
4.Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who
do not know the device to use it without supervision.
5.WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental
capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their
safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children
should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over
8 years of age and these activities are carried out under supervision.
6.After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with
your hand. Never pull the power cable!!!
7.Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions
such as direct sun light or rain, etc.. Never use the product in humid conditions.
8.Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional
service location to be replaced in order to avoid hazardous situations.
9.Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work
properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to
a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair
that was done incorrectly can cause hazardous situations for the user.
10.Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
11.Never use the product close to combustibles.
12.Do not let cord hang over edge of counter or touch hot surfaces.
13.Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it
off from the network, unplug the power.
14. Always unplug the device after using and before cleaning.
15.
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with
residual current rating not more than 30 mA. Contact professional electrician in this matter.
DETAILED SAFETY CONDITIONS
1. The device is intended for indoor use only.
2. Do not clean the casing using aggressive detergents in the form of emulsion, lotion, paste, etc. They can remove graphic
symbols placed on the casing, such as: markings, warning signs, etc.
3. Do not put empty dishes or containers on top of device.
4. Do not use the electric stove for heating rooms or heating flammable, explosive, harmful or volatile liquids or substances.
5. Do not use accessories other than recommended by the manufacturer. Those can be dangerous for user and may cause risk of
device damage.
6. Do not move the device by pulling the power cord. Make sure that the power cord is not blocked in any way. Do not wrap the
cord around the device, do not bend the cord.
7. Do not move the electric stove while cooking, or when hot dish is placed on top of it.
8. Before cleaning or storage make sure the device has cooled completely.
9. Do not place the device in such locations where the heating plate could touch other devices cables (for instance. mixers). Do not
place the stove directly under power outlet.
10.Place the stove at least 30 cm away from walls, furniture, other devices, containers, etc. Make sure the curtains, clothes or other
flammable materials are not closer than 30 cm from the stove. Otherwise, this can cause a fire.
11.Do not put PVC, paper, cardboard containers on the heating plate.
12.Do not touch the housing and heating place during operation. When the stove is on, operate only the knobs.
After switching off wait for the stove to cool.
13. Accessible surface temperatures can be high when the appliance is operating. Never touch the hot surfaces of the appliance.
14.The device is not designed to work with external schedulers or separate remote control system.
15. Children aged 3 to 8 years old can enable and disable the device only when it is in its normal position of use, they are supervised
or instructed on the safe use and understand the resulting risks. Children aged 3 to 8 years old can not connect device, operate,
clean or maintain.
16. Keep the appliance and its cord out of reach of children less than 8 years.
DEVICE DESCRIPTION
1. Main part
3. Control knob
4. Orange control lamp
USING THE DEVICE
NOTICE: It is recommended to run the stove for about 15 minutes before first use. This will remove protective layer from the heating plates. This can produce small amount of smoke. Make sure the
room is well ventilated.
1. Place the stove on flat surface at least 30cm away from walls, furniture, other devices, containers, curtains and other flammable materials.
2. Connect the power plug to the power outlet.
3. Place flat bottom dish on the heating plate [2], [2a], [2b]. Use of dishes with bottom surface equal or bigger than heating plate surface is recommended in order to avoid energy losses. Put only
the dish with clean and dry bottom on clean and dry heating plate.
4. Turn the device on using appropriate knob for used heating plate [4].
5. Use the knob [3] to set desired temperature (1 for heating, 6 for maximum temperature)
6. After switching the stove on, the control lamp [4] corresponding to the heating plate used [2, 2a, 2b] should illuminate. The control lamp will turn on and off depending on embedded thermostat
duty cycle.
7. Never leave the operating stove unattended.
8. After use turn the knob [3] in position "0". The control lamp [4] should turn off. The control lamp extinction does not mean that the stove is off. NOTICE: Always unplug the power cable from the
power outlet after use.
9. In case a crack in heating plate [2, 2a, 2b] or housing [1] is noticed, immediately turn the stove off with knob [3] and unplug the power cable.
ENGLISH
FUTURE REFERENCE
2.
Heating plate
2.a.
Left heating plate
2.b.
Right heating plate
3
Publicidad
Tabla de contenido
