Snow Joe AutoJoe ATJ-V501 Manual Del Usuario página 5

4. To empty the dust tank, press the dust tank
release button to detach the tank from the
vacuum. Then simply pull out the HEPA
filter and empty the dust tank (Fig. 4).
NOTE: Keep the detached dust tank facing
upwards to prevent spilling its contents all
over the place!
NOTE: The filter is re-usable, do not throw
it away when the product is being emptied.
Fig. 4
HEPA
filter
Dust tank
5. Place the filter back into the dust tank and
press firmly to ensure a secure fit. Place
the dust tank back onto the vacuum until it
"clicks" firmly into position (Fig. 5).
NOTE: It is very important that the filter is
correctly in position before use.
Fig. 5
Dust tank
HEPA filter
6. Turn off and unplug when not in use (Fig. 2).
Nozzle Attachments
Included with your handheld vacuum cleaner
are three nozzle attachments for cleaning
different areas and surfaces of your vehicle.
Each can be attached directly into the vacuum
(Fig. 6) or via the flexible extension hose for
greater reach (Fig. 7).
Dust tank
release button
"click"
NOTE: The extension hose can only connect to
the vacuum on the end marked with an arrow,
and connect to other nozzle attachments on the
end without an arrow.
Fig. 6
Crevice
nozzle
Fig. 7
Extension hose (no arrow end)
Maintenance
The filters are reusable and should be cleaned
regularly using the included cleaning brush or
rinsed with water. Optimum dust collection will
only be achieved with clean filters (Fig. 8).
NOTE: After rising, allow filter to dry before
placing back into the vacuum.
Fig. 8
m
CAUTION!
cleaner to rain or wet conditions. Water entering
the unit will damage it.
m
CAUTION!
power cord.
m
WARNING!
away from hot surfaces or under direct sunlight
to reduce the risk of a short circuit.
5
Extension hose (arrow end)
Brush
attachment
HEPA filter
Cleaning brush
Do not expose the vacuum
Do not pull or yank on the
Store the vacuum cleaner