Operation; Making A Call - Mr Handsfree Blue Vision II Manual Del Usuario

Before using the mr Handsfree Blue Vision II make sure that:
• The carkit is paired and connected to your phone.
• The phone's Bluetooth
• The carkit is switched on and the battery status indicator (11) is blinking.

MAKING A CALL

Using your mobile phone's keypad
Dial a number on the keypad.
Using voice dialing
When no call is in progress, press the Talk button (5) or the Talk button (14) on the remote control once.
indicates that you can say the desired name ("voice tag").
phone number.
You can also activate voice dialing with your phone. For details on voice dialing, please refer to your phone's user's manual. Please
note that the voice dialing function is only available if it is supported by your mobile phone.
Using the digital keypad on the remote control
Press the keypad buttons to compose the number (for "+", you should press and hold the * button until you hear a confirmation beep).
Press the Talk button (14) on the remote control to start the call.
Using speed dialing
Speed dialing allows you to set a single-digit number for the telephone numbers you call most. You only have to select the speed dial
number to dial the corresponding telephone number. The Blue Vision II can store up to 10 speed dial numbers.
Programming speed dial numbers
Press and hold the "OK" button (19) on the remote control for 2 seconds until you hear a double beep tone.
to "9" to select the memory location where you would like to store the telephone number. You will hear a double beep tone.
the telephone number using the digital keypad.
you don't want to save the number. You will hear a double beep tone.
to the selected speed dial number.
Note:
• You can write the names for the recorded speed dial numbers on the back side of the remote control where the corresponding
memo card (21) is provided.
• If you want to replace a programmed telephone number in the speed dial memory, you should follow the same steps as described
above to overwrite the number by a new telephone number.
Making a call
Select the speed dial number to which you have assigned the telephone number that you would like to call.
corresponding digital button on the remote control for 2 seconds.
number will be dialed.
Deleting all speed dial numbers
Switch off the power of the Blue Vision II by using the ON/OFF button (4).
press the ON/OFF button (4) for 1 second while pressing the Reject button (6).
speed dial list has been cleared.
®
feature is on; see your phone's user's manual.
Press the phone's Talk button.
Press the "OK" button (19) to confirm the number or press the Reject button (15) if
Your Blue Vision II is now in ON position.

OPERATION

OPERATION
Say the voice tag. The phone plays the voice tag and dials the related
The telephone number you have entered will now correspond
You will hear a triple beep tone and the corresponding telephone
Press and hold the Reject button (6) of the main unit and
You will hear a confirmation tone to indicate that the
GB - 5
You will hear a tone that
Press a button from "0"
Enter
Press and hold the