W&W Cycles Bates 30-460 Guia De Inicio Rapido página 2

HOW TO USE
Bates Headlight
Product
Stoneguards Baja
Articles 30-460, 30-461
Date 2015-09-01
133604
Editorial ID
• The stoneguard fits 5-3/4" headlights with a bezel to support the
insert.
• For a quick installation just loosen the bezel and hook the three
support prongs between bezel and insert. It may be necessary to
bend the prongs, according to which type of headlight you're wor-
king on. Then line up the guard and bezel and tighten the screw
on the bezel. Ready.
• If you can't simply push the prongs between insert and bezel, you
will have to take off the bezel. Then install the guard and re-install
the bezel. It might be a good idea to have somebody else help
you to keep the stoneguard in place while you are positioning the
bezel and tightening its screw.
© W&W Cycles AG
by
wwag
.com
Page 1 of 1