Basic Parameters - imilab KW66 Manual Del Usuario

cable when using it again to remove the sweat or moisture
residue.
Note: (If you do not use the watch often, please charge it once
every month.)

Basic parameters

Display
Touch screen
Bluetooth
Material of shell
Material of strap
Battery and
battery life
Button
Charging mode
Water-proofing
FAQ
1. The watch can not be connected to the APP.(Or the watch cant
be found by the APP)
Please make sure the software version of your smart phone is
over Android 4.4 Or iOS 7.0.
Please check whether the watch was connected to another
phone or not, if yes please unbind it at first.
Please make sure you have enabled the Bluetooth function of
your phone. (If it's still not working, we recommend you to exit
all of other APP and reopen the Bluetooth function)
If the watch still cant be connected even after trying the above
steps, please exit the GloryFit APP and restart the mobile phone
and the watch.
*Note:Some smart phones will not be connected to the watch in
low battery mode.
2. Can't get any text/message on the watch
First, please make sure the Bluetooth function is enabled on
your mobile phone, and check whether the watch is connected
successfully with your phone through the GloryFit APP. Then turn
on the "Notifications reminders" in the APP.
Then please check whether you give this APP the permission to
keep running in the background on your mobile phone. If not,
please allow it to keep running in the background.
Hardware parameters
1.28inch TFT 240*240
Capacitive full touch screen
BT5.0
Zinc alloy with vacuum plating
Silicone rubber
340mAh lithium polymer battery
Standby time>30 days
Service time: 7 days (with all features on)
Power button on side
Magnetic charging
IPX8 waterproof level
EN-05