Prodipe IEM3 Instrucciones Para El Uso página 3

The PRODIPE in-ear monitors (IEM 3) have been ergonomically designed for musicians to ensure a
complete seal from any external noise and an exceptional sound reproduction on stage, in a studio
or on the move.
With the IEM 3, the sound is neutral and very balanced from lows through to high notes. The IEM
3 will also give an exceptional sound quality to any of your mobile devices.
Supplied with a range of flexible moulds for maximum comfort.
Technical data
•
Loudhailer Diameter: Ø 10mm
•
Impedance: 16 Ω
•
Sensitivity: 95±3 dB
•
Frequency Response: 10Hz-22kHz
•
Cable Length: about 1.2M
•
Plug: Ø3.5mm stereo
•
Carrying bag, 1pc Spare
•
Earcap: 3 pairs
Instructions for use
1. Put on the headphones
2. Do not cover the transducers!
3. The earcushions have to be replaced from time to time for hygienic reasons.
Attention
Hearing Damage. Avoid using headphones with the volume turned up for an extended period of
time. Doing so can damage your hearing. It is advisable to keep the volume at a moderate level at
all times.
Cleaning the headphones
To clean the headphones, use a soft damp cloth. If necessary, the headphones can be cleaned with soapy
water (use a mild cleanser such as washing-up liquid). Never use solvent-containing cleansers!
Warranty
Prodipe and its distributors decline all responsibility for any damage caused by using this
appliance in a way that does not conform to the conditions of use as set out above.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
IEM 3: studio sound directly in your ear
Page 3