Publicidad
1
10
3
According to your AMD CPU,
place the 4 corner screws (10)
in the corresponding hole of
the CPU adapter (3), Attention
to the direction!
2
8
Depending on your AMD processor, please use
the corresponding corner brackets (5).
3
A
9
B
Position the pump on your CPU previously coated
with thermal paste. Then fix the spring / pressure
screws (9). Start by adjusting the screws then tighten
the screw A, the screw C, then B and finally D.
04
Install Liquid Force step by step
INTEL
1 2 3
AMD1 2 3
Then install the adapter on
the back of your mother-
board.
D
A
D
B
C
C
AM4 1 2 3
UNIVERSEL 4
4
1
6
Depending on your AM AM4 processor, please use
the corresponding hooks (7). Then fix the hooks on the
pump using the screws (13)
13
1
Then fix the corner
brackets on the
pump using the
screws (13).
Be careful do not
forget this step as
this may damage
your installation!
13
7
Publicidad
