Maintenance And Cleaning Instructions; Maintenance; Cleaning - UFO Econat C-15 Manual Del Usuario

7. MAINTENANCE AND CLEANING INSTRUCTIONS

7.1 Maintenance

Attention! Careful and regular maintenance of ECONAT C-15 infrared heater considering
these instructions assume great importance to attain your heater's long and efficient
operation.
1- Check the filthiness of the reflector and IR – filament at least once a month. If necessary,
apply cleaning and maintenance instructions.
2- he frequency and number of maintenance checks must be adjusted considering the
heater's operating environment. Outdoor use or a dusty environment requires more
maintenance.
3- At each maintenance, check for visual deformation of the reflector, grid, and heater
frame. In case of any deformation, consult to your technical service.
4- Check the power cord and plug visually while cleaning the appliance. In case of any
deformation, consult with an electrician.
5- It is recommended to clean regularly the reflector of your heater to ensure proper and
efficient operation.

7.2 Cleaning

Attention! Regular and careful cleaning helps your ECONAT C-15 heater operate for
longer years and more efficiently.
1- Before any maintenance or cleaning of your heater, be sure to unplug the power cord for
your safety.
2- To clean the reflector of your ECONAT C-15 infrared heaters, remove the unit's grid.
To do so, unscrew the plastic cover of the housing using a star screwdriver (Philips).
Subsequently, drag plastic covers, finishing trim, and grid to the outside of the frame by
following the extrusion guidelines.
3- The reflector and filament must be cleaned with a soft cloth, a smooth brush, or dry air.
The cloth may be damp but never too wet, and the cleaner should not include any
chemicals.
4- Never use abrasive or chemical cleaner so as not to damage your heater.
5- After the cleaning, be sure to reinstall the unit's grid properly using a slotted screwdriver.
16