Ec Declaration Of Conformity - Bresser NATIONAL GEORAPHIC Instrucciones De Uso

To search for metal objects, swing the metal detector back and forth slowly while keeping the search coil
level and approx. 2 cm above the ground. When your metal detector locates a metal object it will start to
emit a tone. The more solid and louder the tone, the stronger the signal, which indicates how close the
object is to the coil. Your unit also has an signal light that will illuminate when the signal strength is strong.
By using both the signal light and the signal tone you will be able to discover many amazing things just
below ground.
Detachable LED light
Power the LED light unit on by pressing the light switch. With the light on, you will be able to work your way
into darker places to find your treasures. The light can also be handy early in the morning and into the early
evening.
Notes on Cleaning
• Before cleaning the device, disconnect it from the power supply (remove batteries)!
• Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use
any cleaning fluid.
• Protect the device from dust and moisture.
• Remove the batteries from the unit if it is not used for a longer time.

EC Declaration of Conformity

Bresser GmbH has issued a 'Declaration of Conformity' in accordance with applicable guidelines
and corresponding standards. This can be viewed any time upon request.
10
Correct
Correct
Wrong Wrong