Coffee Maker
TCF006910CT
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not im-
merse cord, plug or unit in water or liquid. After each use, always make sure plug is first removed from wall
outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product's exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the product base during brewing.
To control the dripping, wipe off the area with a clean, dry cloth after each use of the product.
4) Use a damp cloth to gently wipe the keeping warm plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the water
regularly according to the water quality in your area and the frequency use the appliance, the detail is as
follows:
1. Fill the water tank with water and detergent to the MAX level in the gauge of coffee maker (the scale of
water and detergent is 4:1, the detail refers to the instruction of detergent. Please use "household detergent",
you can use the citric acid instead of the detergent (the one hundred parts of water and three parts of citric
acid).
2. Push carafe on keeping warm plate, pay attention to let central point of carafe aligns with that of brew
basket.
3. Press the switch button once and the indicator in it will be illuminated red. After a while, water will drop out
automatically.
4. After percolate the equivalent of one cup and then switch off the appliance by pressing the switch button
again.
5. Leave the solution work for 15 minutes, repeat the steps of 3-5 again.
6. Turn the appliance on by pressing the button once and run off the water until the water tank is completely
empty.
7. Rinse by operating the appliance with water at least 3 times.
10