Parts List - Antlion Audio ModMic Guia De Inicio Rapido

Getting the most from your ModMic USB
1. The mic is sensitive to plosive blast/wind
from your mouth, especially "P" sounds
(see Figure C).
2. To lessen unwanted cable torque on the clasp,
fold the cable end of the boom so that it is
close to the clasp (see Figure D).
3. Ensure the selector switch on the boom is
pointed towards your mouth (see Figure E ).
Do you need a little more help?
Here are some common troubleshooting steps that may help you out.
1. Ensure the mute switch is unmuted. A red light means the mic is muted. Press the button one time to mute/unmute.
2. Make sure you have the ModMic selected as your default listening device in your recording devices options.
3. Try multiple ports on your computer/device if you're having audio quality issues.
4. Test both uni-directional (switch towards the mic tip) and omni-directional modes (see Fig E).
5. If you need additional help contact us at CustomerService@AntlionAudio.com for service.
6. Some wireless routers may cause interface if close to the mic/cable.

Parts List

One
ModMic USB
C
In-line Carrying case &
instruction manual
mute switch
D
Two base clasps, one One alcohol
top clasp with cap wipe
& extra 3M adhesives
E
Uni-directional
Omni-directional
(selected)
10x
One foam
pop filter