3. Plug into outlet. Turn control dial to the
r i g h t f o r l o w ( s p e e d 1 ) a n d h i g h
speeds(speed2) or left for pulsing(P).
Blend 15 to 30 seconds or until smooth.
Hold jar in place while blending. Always
operate on a countertop or other
supporting surface.
4. Unplug. Twist blending jar
counterclockwise to unlock. Lift up
blending jar to remove.
5. Remove cutting blade assembly with
collar from jar. Hand-tighten drinking
lid onto jar.
3. Blending tips:
1. Place the sport bottle on a at surface, and open it.
2. Fill the bottle with your favorite ingredients. All the ingredients must be filled
below in the bottle max level mark.
3. Fasten the blade base on the open end of the bottle.
4. Turn the bottle upside down. Put the bottle and blade together on the blender
base. Ensure the three micro switch block in the right position.
5. Press the bottle in the base.
6. To lock the bottle in the base for hands-free operation, turn the bottle clockwise in
the base.
7. Either stop pressing the bottle or unlock the bottle from the base, the blender will
stop.
8. Turn the bottle over and place on a at surface. Take out the blade base. Put the
drinking lid on.
Warning notes:
1. The appliance is only permitted to use 30 seconds continuously maximum. Before
it's used again, it must cool down enough.
2. Parts and unit are not dishwasher safe.
3. Do not use for ice crushing.
4. Only for liquid and soft fruits. Cut fruit first in pieces. Do not use hard fruits.
5. When overload, motor will automatically stop. Please unplug, empty up, and wait
for 15 minutes to cool down the motor. After that the blender can be used again.
8