Publicidad
After click Add to bring up the Configuration dialogue
2
ST EP
window as below.
Profile Name: User chose name for this profile.
1
SSID: User can key in the intended SSID name or use pull .
2
Power Save Mode: Choose from CAM (Constantly Awake
3
Mode) or Power Saving Mode. There is a check box for
"CAM when AC power". When this is checked, the wireless
NIC will stay full power when AC power cord is plug into
power outlet.
Network Type: There are two types, infrastructure and 802.11
4
ad-hoc modes. Under ad-hoc mode, user can also choose the
preamble type; the available preamble type includes short and
long. In addition to that, the channel and Ad hoc wireless
mode field will be available for setup in ad-hoc mode.
TX Power: Transmit power, the amount of power used by a
5
radio transceiver to send the signal out. User can choose power
value by sliding the bar.
16
Publicidad
Capítulos
