BrosTrend E1 Guia De Inicio Rapido página 5

6
. Plug the extender into an electrical outlet halfway between your WiFi router and the WiFi dead
zone. Wait until the Signal LED turns on.
7
. Connect your WiFi devices to the extended networks which come with your existing network
name and su xes of _EXT/_5GEXT. WiFi password by default is the same as your existing
WiFi network.
Method 2: Extend Your WiFi Network via WPS Button
1
. Plug the extender into an electrical outlet in the same room as your existing WiFi router.
Wait until the PWR LED is solid blue.
2
. Press the WPS button on your router and within 2 minutes press the WPS button on the
extender. WPS LED on the extender starts blinking. Wait until the Signal LED turns on.
If the Signal LED does not turn on, reset the extender and try Method 1.
English
03