Maintenance / Cleaning - Inspire Ana Instrucciones De Montaje, Utilización Y Mantenimiento

6. Maintenance / Cleaning

Alway disconnect the appliance before cleaning or doing maintenance.
Never use a wet sponge to clean the appliance.
In order to not damage the product,it is advisable to use adapted equipment to the fragile surfaces
and products slowing the wear on the appliance.
7. Repair Guide
TROUBLE PROBABLE CAUSE
Fuse or circuit breaker blown.
Loose power line connections to the
Fan will not
fan.
start
Speed controller not in correct positon.
Top canopy touching ceiling.
Loose fan blades screws.
Ceiling fan not secured against ceiling.
Fan sounds
Incorrect speed controller.
noisy
Mechanical
noise
Fan blades are not horizontal to ceiling.
Blade screws are loose.
Fan wobbles
8.Others (Service, Repairing, Guarantee, etc.)
Have your product repaired by a quali ed person.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by quali ed persons using original spare parts, otherwise This may
result in considerable danger to the user.
Please contact the store which you bought the product for after sale services if any question.
Please contact the store which you bought the product if you lost the installation manual.
2 years guarantee for this product based on residential usage 8 hours/day.
When environmental relative humidity is above 90%,blades have to be slightly bended after 2-3years.
37
SUGGEST REMEDY
Check main and branch circuit fuses or circuit
breakers.
Check line wire connections to fan.
Check speed controller's position.
Lower canopy form ceiling to ensure minimum
3mm clearance.
Re-tighten all screws on fan blades but never
over-tighten.
Re-tighten all screws in the hanging bracket or
plate.
Change the controller to one supplied.
Allow at least for 8 hours setting-in period.
Measure from ceiling to tips of baldes,then
rotate fan so all blades are checked for equal
height from ceiling(not adjustments may be
made by slight pressure up or down on blade
holders).
Make sure all screws are securely fastened.
FR
ES
PT
IT
EL
PL
KZ
UA
RO
EN