Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

H-6322
GARMENT STEAMER
TOOL INCLUDED
Wrench
TO USE
1. Attach vertical post to steamer base.
2. Attach handle holder to vertical post.
3. Attach hose and secure with a wrench.
4. Fill jug with hot tap water (cold water takes longer to
preheat).
5. Plug into wall or base receptacle.
FOR STEAM
1. Turn switch to ON position. Ready for use in two
minutes. If the steamer runs dry, it will shut off. Allow
the unit to cool before adding water. Steam may be
applied from either the inside or outside of fabrics.
2. When finished steaming, turn switch to OFF position.
NOTE: Steam will continue when the unit is
turned off until it cools.
PAGE 1 OF 3
1-800-295-5510
uline.com
Handle Holder
Vertical Post
Jug
Steamer Base
OPERATION
Hose
FOR BEST RESULTS
• Straighten hose up and out frequently to keep clear
of condensation.
• Always hang hose upright when not in use.
• Flush steamer regularly with cleaner to prevent
sediment buildup.
• Unplug when not in use.
• For indoor use only.
• Do not run dry.
• Contact Uline Customer Service at 1-800-295-5510
for additional product information or instructions.
Para Español, vea página 2.
Pour le français, consulter la page 3.
1020 IH-6322

Publicidad

loading

Resumen de contenidos para Uline H-6322

  • Página 1 • Do not run dry. 1. Turn switch to ON position. Ready for use in two • Contact Uline Customer Service at 1-800-295-5510 minutes. If the steamer runs dry, it will shut off. Allow for additional product information or instructions.
  • Página 2 Está listo para usar en dos minutos. Si el vaporizador se seca se apagará. Permita a la unidad enfriarse • Comuníquese con Servicio a Clientes de Uline al antes de añadir más agua. El vapor debe ser 800-295-5510 para mayor información del producto aplicado por cualquiera de los lados interiores o o instrucciones.
  • Página 3 • Ne pas utiliser à sec. Réglez l'interrupteur en position « ON » (marche). • Contactez le service à la clientèle de Uline à L'appareil est prêt à l'emploi en deux minutes. Si le 1 800 295-5510 pour des informations et des presseur sèche, il va s'étteindre.