Tabla De Contenido; Task 1: Unpacking The Vessraid - Promise VessRAID 1720i Guia De Inicio Rapido

VessRAID Task List
• Task 1: Unpacking the VessRAID (page 3)
• Task 2: Installing the LCD Panel (Optional) (page 5)
• Task 3: Mounting VessRAID in a Rack (page 7)
• Task 4: Installing Disk Drives (page 9)
• Task 5: Making Data and Management Connections (page 12)
• Task 6: Setting Up Serial Cable Connections (page 17)
• Task 7: Connecting the Power (page 18)
• Task 8: Setting the IP Address (page 21)
• Task 9: Creating Disk Arrays with WebPAM PROe (page 27)
• Contacting Technical Support (page 34)

Task 1: Unpacking the VessRAID

The VessRAID box contains the following items:
• VessRAID Unit
• Quick Start Guide printed
• RJ11-to-DB9 serial data cable
• Screws for disk drives
(70 pieces for 16-bay, 50 pieces
for 12- and 8-bay)
A Battery Backup Unit (BBU) is optional on the VessRAID subsystem. In the
event of a power failure, the BBU powers the controller cache to preserve any
data it contains.
• There is a risk of explosion if the battery is replaced by the
incorrect type.
• Dispose of used batteries according to the instructions that
accompany the battery.
Task 1: Unpacking the VessRAID
• 1.5m (4.9 ft) Power cords
(1700i models, 1; 1800i models, 2)
• CD with SNMP files, Product
Manual and Quick Start Guide in
PDF format
Caution
3