14
Cleaning & Finishing Pads and Clean Track Solution
Cleaning Pads Use with Clean Track Solution to remove oil and dirt.
Finishing Pads Use after Cleaning Pads to dry track and ready rails for
operation.
Clean Track Solution Use with Cleaning Pads to remediate oil and remove dirt
and grime. Safe for use with plastic, Woodland Scenics landscape material and
most paint.
Instructions
1. Place one drop of Clean Track Solution on both sides of Cleaning Pads where
they makes contact with the rails
saturate.
2. Scrub rails with light downward pressure.
3. After using Cleaning Pads, run Finishing Pads along rails to remove excess
Clean Track Solution and ensure optimal conduction. This is the final cleaning
step before running your train.
12
. Repeat on second Pad. Do NOT over
14
CLEANING SCHEDULE
Clean track using the Tidy Track Pads in the order listed.
Initial
Required Cleaning
Cleaning
Cleaning Pads
Maintenance Pads
Step 1
Rescue Pads
If needed
Cleaning Pads
Step 2
Finishing Pads
Step 3
Dust Monkeys
Step 4
REqUIRED CLEANING
Initial Cleaning
Newly installed track or first time use of the Tidy Track Rail and Wheel
Maintenance System
Monthly Cleanining
Simple, monthly cleaning routine for maintaining track performance and conductivity
Semi-Annual Cleaniing
Preventive maintenance routine to be performed every 6 months or after
landscape changes
Neglected Layout
Track maintenance tailored to unused, neglected layouts
Monthly
Semi-Annual
Neglected
Cleaning
Cleaning
Layout
Step 1
Step 1
Step 1
Step 2
If needed
If needed
If needed
Step 2
Step 3
Step 3
Step 4
Step 2
Step 4
Step 5
13