Installation Of Programming Connections - Lutron Electronics Energi Savr Node QS DALI Manual De Instrucciones

English Español
Energi Savr Node
Installation of programming connection
WARNING! Danger of Shock. May result in serious injury or death. DO NOT WIRE WHEN LIVE! Switch off power via circuit
breaker before wiring or servicing the Energi Savr Node QS unit.
Buttons and LEDs on the front of the unit are used for troubleshooting. If wiring is exposed when accessing buttons and
LEDs, the unit must be accessed by a certified electrician, following local codes.
• Wireless router only required for programming with an Apple iPod touch or iPhone mobile digital devices.
• Wireless router may be removed for normal operation.
• Ethernet connection may be made via an an Energi Savr Node Programming Interface or an Energi Savr Node QS unit with integral
Ethernet jack.
• Lutron recommends that an Energi Savr Node QS DALI unit be wired to an Ethernet jack in the space for ease of access and
proximity to power for the wireless router.
• Works with any standard wireless router that supports multicast packets.
• Apple iPod touch or iPhone mobile digital devices can program other Energi Savr Node QS units connected to an Energi Savr Node
QS DALI unit via the QS Link (except when part of a Quantum
• Energi Savr Node app is required and is available from the Apple iTunes Store online marketplace.
Recommended: Install Wall Jack for Commissioning
Easily accessible Ethernet wall jack installed in the area which has the lights
Energi Savr Node QS unit
1
QS Link
* Note: Energi Savr Node QS units are not designed to exist on an open network. Connection to an open network could result in reduced performance and Ethernet
connectivity issues.
If ethernet wall jack is not installed, turn power off to Energi Savr Node QS unit before connecting ethernet cable.
Apple, iPhone, iPod touch, and iTunes Store are trademarks of Apple Inc., registered in the U.S. and other countries.
Energi Savr Node QS DALI Installation Guide
TM
English
Français
|
QS DALI
TM
2
Dedicated
2
Ethernet
Connection for
Energi Savr
Node
QSM
QS units*
Português Italiano
Installation Guide
system).
®
Apple
iPod touch
or iPhone
mobile
Wireless
digital
Router
device
(by others)
QS Link
Deutsch
中文
Wire types:
Less than 153 m: Lutron
1
®
GRX-CBL-346S
153 m to 610 m: Lutron cable
GRX-CBL-46L
Standard CAT5/CAT5E cable:
2
Total length not to exceed 100 m
1
Lutron
cable
9
|
®