Rebel RB-1020 Manual Del Usuario página 34

• Hold the spindle lock button (1) pressed and tighten the lock nut with the key included
in the set.
• Make sure that the lock nut has been attached properly and the wheel adheres to the
inner flange.
To remove the wheel follow the below instructions:
• Keep pressing the spindle lock button and unscrew the lock nut with the key included
in set.
• Remove the lock nut and the wheel.
Switching the power tool on and off
WARNING. Prior to each use, check if the power tool is fully functional and the wheel has
no signs of damage.
• Slide the ON/OFF switch (6) forward to switch on the power tool.
• Slide the ON/OFF switch (6) backward to switch off the power tool.
MAINTENANCE
Before cleaning and maintenance, always switch off the power tool and disconnect
it from power supply socket.
Clean the casing regularly with a soft cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth
moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc.
Chemicals such as these will damage the synthetic components.
Clean the power tool before storing. Store the power tool, user manual and accessories
in the original packaging. Store the product in a clean, dry place protected from moist and
keep it out of the reach of children. Do not store the power tool in temperatures below 0°C.
Do not place or store any object on the top of the power tool.
The product and the user manual are subject to change. Specifications can be changed
without further notice.
EN 34