Maintenance And Cleaning - Kalorik USK SKV 2 Manual De Instrucciones

MAINTENANCE AND CLEANING

Cleaning the dust collector cup
Clean the dust cup regularly and make sure
the dust level never exceeds the max level
indicated on the dust cup.
To remove the dust cup please rotate it
90°clockwise (Step 1) and take it out (Step 2).
Remove the filter, empty the dust cup and
clean it with water.
Dry it before assembling it.
To install the dust cup, make sure the groove
underneath the dust collector slides along the
3 pins on the main unit (step 1) and rotate it
anticlockwise until it is locked properly (step 2)
(the dust cup's handle should be aligned with
the main body's handle).
Cleaning the filter
Take the filter out of the dust cup and
shake it or wash it carefully in water. Allow
the filter to dry completely before
replacing it.
Note: Neither wash the filter in washing
machine nor dry it by electric heater,
instead wash it in warm water and dry it
naturally.
8
Remove
Install
USK SKV 2 - 060104