Important; Fig. 1 - Strong Z400N Manual De Instrucciones

EN
1. Assembling the base frame.
Put the base frame in front of you on a table, with the screw holes nearest to you.
Note the notches near the frame's endings, between the screw holes,
have 1 notch to the left and 2 notches to the right.
Put the pillar stand signed with "L" at the right-hand side of the base frame, make
sure the 2 notches align with the 2 marker pins. The 2 screw holes are now aligned
too. Use a suitable screwdriver to enter and tighten 2 pcs (M4x8) screws.
Put the pillar stand signed with "R" at the left-hand side of the base
frame, make sure the 1 notch aligns with the marker pin.
The 2 screw holes are now aligned too. Use a suitable screwdriver to enter and tighten 2 pcs (M4x8) screws.
Do not use brute force.
2. Connect the base frame to the TV.
Place the TV with the display side downwards on a flat surface (table).
Use a cloth or big towel to protect the display.
Insert the top of the pillar stands in to the cavities in the underside of the TV, make sure the base frame
front is at the display side of the TV. The 2x2 screw holes in the back of the TV should be aligned. Use
a suitable screwdriver to enter and tighten the 4 pcs (M4x26) screws. Do not use brute force.
3. Put the TV carefully to its feet.
4. Alternative: wall mounting
This TV is designed to be wall-mounted with a standard 200 x 100 mm mounting kit designed for flat-panel TVs.

IMPORTANT:

To ensure a safe installation, comply with the following safety instructions:
This operation requires two people!
„
Disconnect from power supply before mounting.
„
Check that the wall can support the weight of the TV set and wall mount assembly.
„
Follow the mounting instructions provided with the wall mount.
„
The TV set must be installed on a vertical wall.
„
Make sure to use only screws suitable for the material of the wall.
„
Make sure that the TV set cables are placed in such a way that there is no danger of tripping over them.
„
Mounting the TV set on the wall should be performed only by professionals.
„
4.1 Use the expansion bolts to fix the wall mount brackets into the wall.
4.2 Place the TV onto a solid surface. Please place some soft material over
the front of the screen to protect it from any damage.
4.3 Use the 4x screws provided to fix the TV onto a wall mounting bracket
via the 4x VESA standard holes on the back of the TV.
40": M6X8
32": M4X5
4.4 Put the TV with wall mount screws onto the wall mount brackets.
VESA wall mount types are especially made for this and will fit well (not included).

Fig. 1

Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7