Gorilla Carts GOR211-1 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
Note: During assembly of each step of
assembly, assemble all hardware and hand
tighten. Once all the hardware is installed for
that particular step, tighten all the hardware.
1. Attach the rear axle frame of the rear
axle assembly (D) to the tray (A) using two
M8 x 45mm internal button head bolts
(CC), two M8 lock nuts (JJ), and four M8
washers (II).
Attach the left and right rear struts to the
tray using four M8 x 20mm internal button
head bolts (BB), four M8 lock nuts (JJ), and
eight M8 washers (II), as shown in Fig. 1.
BB
I I
Hardware Used
BB
M8 x 20mm
Internal Button
Head Bolt
CC
M8 x 40mm
Internal Button
Head Bolt
JJ
M8 Lock Nut
I I
M8 Washer
4
Fig. 1
A
D
CC
JJ
x 4
x 2
x 6
x 12