First Steps And Getting Started; Charging The Battery - EGRET EIGHT Traducción Del Manual Original De Uso

FIRST STEPS AND GETTING STARTED

1. CHARGING THE BATTERY

Note that for safety reasons the scooter is
delivered with a low charge. This is why it
is a good idea to charge the scooter after
receiving it.
To charge, turn the protective cover to the
1
side (EGRET-TEN) or remove the plastic
plug from the charging socket (EGRET
EIGHT).
The charging socket is located on the front
right frame of the EGRET-TEN and on the
front left of the EGRET EIGHT.
First connect the charger to the power
socket. Then connect the charging cable to
the port on the scooter. Make absolutely
sure that the scooter cannot tip over on the
plug.
Never charge unattended, ideally on a fi re-
2
proof, non-conductive surface.
56