Avaya HIS Guia De Inicio Rapido

User Guide
HIS Headset Adapter Cable
Amplifier Installation
HIS Cable Adapter HIS Kabeladapter
Adaptador de cable HIS HIS kabeladapter
Câble d'Adaptation du HIS Adattatore cavo HIS
Fio Adaptador HIS HIS-kaapelisovitin
Use of the HIS Product
The HIS product allows the use of Avaya universal headsets on Avaya 96xx - series
telephones. The HIS allows the user to directly connect a headset into the headset port
of the telephone.
Installation of the HIS Cable Adapter
Connect the modular plug of the HIS Adapter cable to the headset port of your
telephone.
Connecting a Headset to the HIS Cable Adapter
Any Avaya headset will connect to the Quick Disconnect™ (QD) on the HIS cable.Plug
the headset QD into the HIS.
Making Telephone Calls using the HIS and a Headset
Dial tone is given when you press the headset button on the phone.
1) Press the headset button on the phone and listen for dial tone in the headset.
2) Adjust the volume to the headset by adjusting the handset volume control on the
phone. Take care to place the microphone of the headset approximately 2.5cm
(1 inch) from the corner of your mouth. Refer to the headset user's guide for more
information on the use of the headset.
© 2006 Plantronics, Inc. All rights reserved. Avaya and the Avaya Logo are trademarks of Avaya Inc.
and may be registered in certain jurisdictions. QuickDisconnect is a trademark of Plantronics, Inc.
16-601419 Issue 1 (9/06)
FCC Requirements
Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior
of this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested,
this information must be provided to your telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible jack that is also
compliant. See installation instructions for details.
The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but
not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you
may connect to your line, as determined by the REN, contact your local telephone company. For product
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ### are the REN without the decimal point. (For example, 03
represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.
If this telephone equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to
make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this unit, for repair or warranty information, please contact customer service at
(800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user serviceable components.
We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected.
Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer
terminal equipment connected to AC power sources.
e n g l i s h
Uso del producto HIS
El producto HIS permite la utilización de los auriculares universales de Avaya en los
teléfonos series: 96xx. El HIS permite que el usuario conecte el auricular directamente
en la entrada para el auricular de mano del teléfono.
Instalación del cable del adaptador HIS
Conecte el enchufe modular del cable del Adaptador HIS en el toma de su teléfono.
Modo de conectar un auricular al adaptador del cable del HIS
Cualquier auricular de Avaya conectará con el dispositivo de Desconexión Rápida
("QD") del cable del HIS. Conecte el QD del auricular en el HIS.
Modo de hacer llamadas utilizando el HIS y un auricular
Se da el tono para marcar al oprimir un botón en el teléfono.
1) Oprima el botón "Line" [línea] que se encuentra en el teléfono y espere hasta
escuchar el tono por el auricular de mano.
2) Ajuste el volumen del auricular ajustando el control del volumen del auricular de
mano que se encuentra en el teléfono. Tenga cuidado de colocar el micrófono del
auricular a aproximadamente 2.5 cm (1 pulgada) de distancia de la comisura de
su boca. Consulte con la guía para el usuario del auricular para obtener más
información acerca del uso del auricular.
The CE mark affixed to this equipment means that it conforms to the following European Union Directives:
Electromagnetic Compatibility Directive (89/336/EEC)
Low Voltage Directive (73/23/EEC)
La marca CE adjuntada a este equipo significa que cumple con las siguientes Directivas de la Unión Europea:
Directiva de Compatibilidad Electromagnética (89/336/EEC)
Directiva de Bajo Voltaje (73/23/EEC)
Le marquage CE placé sur cet équipement signifie qu'il est conforme aux normes européennes suivantes:
Directive relative à la Compatibilité Électromagnétique (89/336/EEC)
Directive relative aux Basses Tensions (73/23/EEC)
A marca CE afixada a esse equipamento significa que ele está dentro dos seguintes padrões União Européia Diretrizes:
Diretriz Compatível Eletromagnética (89/336/EEC)
Diretriz de Baixa Voltagem (73/23/EEC)
Das an diesem Gerät angebrachte CE-Zeichen bedeutet, dass es die folgenden Richtlinien der Europäischen Union
erfullt:
Elektromagnetische Kompatibilitäts-Richtlinien (89/336/EEC)
Niederspannungs-Richtlinien (73/23/EEC)
De CE-markering op dit apparaat betekent dat het aan de volgende richtlijnen van de Europese Unie voldoet:
Richtlijn Elektromagnetische compabiliteit (89/336/EEC)
Richtlijn Laagspanning (73/23/EEC)
Il simbolo CE affisso su questo apparecchio significa che lo stesso è stato construito a norma delle seguenti direttiva
della UE:
Direttiva sulla Compatibilità Elettromagnetica (89/336/EEC)
Direttiva sul Basso Voltaggio (73/23/EEC)
Tähän laitteeseen kiinnitetty CE-merkki on tarkoittaa, että laite noudattaa seuraavia EU-direktiivejä:
Direktiivi elektromagneettisesta yhteensopivuudesta (89/336/EEC)
Matalajännitedirektiivi (73/23/EEC)
e s p a ñ o l
Utilisation du produit HIS
Ce produit HIS permet l'emploi de casques universels Avaya sur les téléphones Avaya
de séries 96xx. Le HIS permet à l'utilisateur de brancher un casque directement dans la
prise pour combiné du téléphone.
Installation de l'adaptateur de câble HIS
Brancher la fiche modulaire du câble d'adaptation du HIS sur la prise de casque de votre
téléphone.
Branchement d'un casque sur l'adaptateur de câble HIS
Tout casque Avaya peut être branché sur le Quick Disconnect (QD) du câble HIS.
Brancher le QD du casque dans le QD du HIS.
Pour téléphoner avec le HIS et un casque
La tonalité s'obtient lorsqu'on appuie sur une touche du téléphone.
1) Appuyer sur la touche "ligne" du téléphone et confirmer la tonalité dans le casque.
2) Régler le volume du casque en réglant la commande de volume du téléphone.
S'assurer de bien placer le microphone du casque à environ 2,5 cm du coin de la
bouche. Voir le guide d'utilisation du casque pour plus d'informations sur son emploi.
Printed in the U.S.A.
49117-02 (02•07)
f r a n ç a i s